If you crank up the volume on the clean channel, is there a similar sound?
30% off all Honey Amp kits, check it out at https://store.ssguitar.com !
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Show posts MenuQuote from: Domin9797 on August 02, 2023, 01:59:54 PMYeah but often shipping costs more than PCB. TPA3116 is good choice too but im not sure if i want PA which cant sound "good" while clipping. I have only 20W speaker so im little bit limited.
I know about his circuits. His MDR will be my distortion channel or at least distortion pedal. Im not sure about 59 Bassman since there arent any sound clips of it. Another idea is his Orange emulator
Quote from: Tassieviking on August 02, 2023, 12:16:23 PMIf the crunch is developed in the Power Amp then you are out of luck, unless you have lots of thick blankets.
Quote from: phatt on July 19, 2023, 07:38:21 AMHi Joe,
Sadly no as that hard drive died and took with it a lot of stuff. I do have some pcb pictures on CD somewhere but they are the early versions which were hand drawn and the early circuits are different.
It's not a hard circuit to layout as there are not many parts and only one chip.
Someone on another forum posted a perfboard layout of it, just let me know if you go in that direction and I'll post it.
Phil.
Quote from: Domin9797 on July 16, 2023, 04:55:18 AMAny schematics for it? Links aren working anymore
Quote from: Diary Of An Axeman on July 18, 2023, 03:20:55 AMI just fixed the the expression pedal for an old 1968-1969, Univibe .
Plugged it started playing it for a couple of weeks and the fuse blew out .
I did the old aluminum foil tick and found the unit still works, then I unplugged it and took out the foil and put the unit away.
Would any of you techies out there know what kind of fuses that 1968-1969 Univibes used.
Any help would be greatly appreciated .
Quote from: phatt on July 14, 2023, 05:46:40 AMThe Triumph Overdrive was impressive.
Smart move adding a decent tone control on a dirt pedal.
And designing one where the midrange actually works.
That's why I love my PhAbbtone so much as the mid control is very potent.
Humm, maybe he has been reading the forums and found my circuit. Phil.
Quote from: Amestech on July 02, 2023, 06:15:52 PMUpdate. Ground issue solved. R150 popped. Missed that little piece of the schematic hiding in there.
Quote from: smadin on June 27, 2023, 06:12:59 PMGreat stuff, and a very pro looking build!
Quote from: smadin on June 27, 2023, 06:12:26 PMLate to this party, but I figured I'd chime in that I also ended up finding I had to make my own LM386 model from the data sheet. I expect Paul's is more correct than mine, so I'm excited to compare them.