Welcome to Solid State Guitar Amp Forum | DIY Guitar Amplifiers. Please login or sign up.

Recent Posts

 

The Big Heavy Elephant 🐘 (in the room)

Started by saturated, November 19, 2026, 07:45:45 PM

Previous topic - Next topic

saturated

I've had this probably about five years

It's a big Bud Radio box with a DIY (unknown persons) DC power supply.

It has selenium rectifiers, rigid varnished wire, two big capacitors, a very heavy choke and a weird eyelet board containing a big diode and resistors and (TO-39?) transistors and capacitors

It does not have (and apparently never did) a transformer  xP

And of course no it won't even be considered attempted to fix without one.

Anyhow here are some pics the big caps and choke are not presently attached

You cannot view this attachment.

Oh look it's a convertible  xP

You cannot view this attachment.

The chassis slides out the front

You cannot view this attachment.

The back is open for the convenient storing of illicit items

You cannot view this attachment.

The topside of the circuit

You cannot view this attachment.

And the bottom

You cannot view this attachment.


The big caps

You cannot view this attachment.

You cannot view this attachment.

Speaking of Mallory...this is gonna be difficult enough for me but whatever is going on on that eyelet board is gonna be my personal Mount Everest  :'(

I think nothing is going to happen until I can translate these physical objects to a two dimensional facsimile aka schematic and attempt to make heads or tails of it

That being said I may jumper the caps or not maybe they are just parallel idk and jumper the choke connectors and feed it low voltage AC from a transformer like six volts and see if it has any output whatsoever
Welcome to ssguitar.com

Where YOU become the PRO !

saturated

Alright well the obligatory "no way this works but we have to try it anyway" yielded some surprising results  :tu:

It took me a while to remember the insulating varnish  xP

Everything hooked up

Meter on left measuring transformer secondaries

Meter on right measuring DC output (if there is any)

You cannot view this attachment.

And here we go

Oh crap  :dbtu:

You cannot view this attachment.

You cannot view this attachment.

Who knows how bad off this thing is but that was surprising to say the least  xP  :loco

And those alligator clips don't connect well to small wire

The DC was definitely jumping around a bit

Also the big green bulb never came on

I had a difficult time trying to guess which way the toggle switch was on or off

And same with the rheostat  xP
Welcome to ssguitar.com

Where YOU become the PRO !

J M Fahey

Draw-the-schematic

saturated

#3
One thing I need to do is identify the two transistors and make note of the connection

Here is Q1 and a zener diode

You cannot view this attachment.


And Q2

You cannot view this attachment.


Welcome to ssguitar.com

Where YOU become the PRO !

saturated

Orientation of each on board

You cannot view this attachment.

You cannot view this attachment.

Welcome to ssguitar.com

Where YOU become the PRO !

saturated

This is cool I just noticed the board has some markings

You cannot view this attachment.

You cannot view this attachment.

Welcome to ssguitar.com

Where YOU become the PRO !

saturated

Eyelet board components

R2 R3 ohmite brown devil 25 ohm

Unlabeled resistor 1000 ohm

Zener diode PS 6470A

Q1 2N335

R1 3300 ohm

CR7 big diode H1N29(?)

R4 390 ohm

R5 Clarostat VC10F 10W

C2 big Sprague 600V

Q2 2N489

R9 47 ohm

Later gonna have to undo the board from the chassis flip it over and go to town  xP  :'(
dead reckoning VFR
Welcome to ssguitar.com

Where YOU become the PRO !