collapse

Author Topic: Gibson Maestro Reverb Echo speaker impedance  (Read 901 times)

Hawk

  • Elite
  • ****
  • Posts: 223
  • Chip Points: 3
    • View Profile
Gibson Maestro Reverb Echo speaker impedance
« on: April 24, 2018, 09:50:25 AM »
I'm troubleshooting a Gibson Maestro Reverb Echo amp and wondering if anyone knows the impedance of the 8 inch speaker? It shows a very low resistance reading .7 ohms so I know it's done.
Thanks.

Enzo

  • Legendary
  • ******
  • Posts: 1853
  • Chip Points: 190
    • View Profile
Re: Gibson Maestro Reverb Echo speaker impedance
« Reply #1 on: April 24, 2018, 12:40:37 PM »
8 ohms is close enough for any amp in the world to run through.

Is this 0.7 ohms taken while the speaker is still connected to the amp?  If so, pull the wire off the speaker, as you would be measuring the output transformer winding, which has naturally VERY low resistance.

Hawk

  • Elite
  • ****
  • Posts: 223
  • Chip Points: 3
    • View Profile
Re: Gibson Maestro Reverb Echo speaker impedance
« Reply #2 on: April 25, 2018, 11:32:04 AM »
8 ohms is close enough for any amp in the world to run through.

Is this 0.7 ohms taken while the speaker is still connected to the amp?  If so, pull the wire off the speaker, as you would be measuring the output transformer winding, which has naturally VERY low resistance.
Thanks Enzo... lesson learned--speaker is good!

Sent from my XT1635-02 using Tapatalk


 

* User Controls

 
 
Welcome, Guest. Please login or register.
Did you miss your activation email?

* Recent Posts

Peavey Audition Plus by psafloyd
[October 17, 2019, 03:24:56 PM]


Carlsbro Hornet (1970s) by psafloyd
[October 16, 2019, 11:37:28 AM]


Thoughts on the difference in sound between tubes and solid state by jfetter
[October 15, 2019, 07:59:26 AM]


I want to ask a question by Jmatt
[October 11, 2019, 10:47:17 PM]


Does A500 mean 500 ohms or 500k ohm by slimjohnny
[October 11, 2019, 07:11:19 PM]

* Sponsors