Randall RG100 G3 Plus

[zadmight]

Hi all,
I'm looking for RG100G3 Plus preamp schematic. The schematic I found on this forum doesn't correspond to the PCB. The board code is RG75G3-A...

Thanks a lot to all who can help

[DrGonz78]

Try this one out...

[zadmight]

Thank you. Unfortunately that schematic is not the right one. In my PCB there is 4  2n5484 transistor involved in the preamp gain1 and gain2. Also the clipping LED are not present...

[zadmight]

I finally found the schematic. Thanks to Randall support guys