Welcome, Guest. Please login or register.
Did you miss your activation email?

January 27, 2020, 01:42:55 AM

Login with username, password and session length

Recent Posts

Author Topic: Baldwin Professional  (Read 31095 times)

gusfinley

  • Chipper
  • *
  • Posts: 1
  • Chip Points: 0
    • View Profile
Re: Baldwin Professional
« Reply #15 on: April 20, 2009, 04:48:10 PM »
Hi,
 I'm new here, but, have scans of the original Baldwin schematics and a lot of NOS Baldlwin Amp parts. My day job is in tech support for USA built Baldwin organ products. I've restored a few of these amps in the last 10 or so years. If someone wants to try building a similar amp, I have NOS power and Interstage transformers. Also, PNP Germanium TO-3 output transistors, all from old Baldwin stock.
 If anyone needs it, I can email the larger scans.
Later,
 Mr. Lynn

Guitarampsky,

 I've got a buddy looking for a Baldwin 48C service manual. I would greatly appreciate your help. Check your PMs.

Thanks!

Geeky

  • Chipper
  • *
  • Posts: 1
  • Chip Points: 0
    • View Profile
Re: Baldwin Professional
« Reply #16 on: October 03, 2012, 08:32:19 PM »

MR. Lynn: You wouldn't by chance have an extra supersound colored button would you? I've had my amp "Willie" for about 15 years and it has been missing the purple button since I got it. Any color would do though. BTW, I slapped a EHX Magnum 44 series wired and this amp sounds better than it ever did. Thanks, g
Hi,
 I'm new here, but, have scans of the original Baldwin schematics and a lot of NOS Baldlwin Amp parts. My day job is in tech support for USA built Baldwin organ products. I've restored a few of these amps in the last 10 or so years. If someone wants to try building a similar amp, I have NOS power and Interstage transformers. Also, PNP Germanium TO-3 output transistors, all from old Baldwin stock.
 If anyone needs it, I can email the larger scans.
Later,
 Mr. Lynn

johnhoef

  • Chipper
  • *
  • Posts: 1
  • Chip Points: 0
    • View Profile
Re: Baldwin Professional
« Reply #17 on: November 05, 2019, 01:52:50 PM »
Guitarampsky, are you still around here? If not, any one know where I can get a schematic for this Baldwin professional guitar amp?
Thanks.