Welcome to Solid State Guitar Amp Forum | DIY Guitar Amplifiers. Please login or sign up.

Recent Posts

 

Testing a diy "darlington"

Started by saturated, November 17, 2026, 07:37:32 PM

Previous topic - Next topic

saturated

I grabbed a pair of transistors

You cannot view this attachment.

And connected them got ready to try and test with the amprobes and thought hey wait try it with the peak atlas

You cannot view this attachment.

Holy cow

You cannot view this attachment.

Voltage

You cannot view this attachment.

Impressive to say the least  :tu:
Welcome to ssguitar.com

Where YOU become the PRO !

saturated

Amprobe HD110C

You cannot view this attachment.


I would try the HD160C (auto ranging) but

Nm I tried it it apparently doesn't have a diode function
Welcome to ssguitar.com

Where YOU become the PRO !

g1

Just for your notes, the 2 transistors that make up a darlington in a single package are not always drawn on the schematic like that.
Here are a couple symbols that are used to indicate a darlington on a schematic.
For some bizarre reason, the symbol on the left seems to have been purged from the internet.  It is the symbol I am most familiar with, yet for all my searching for "darlington transistor schematic symbol", it does not come up anywhere.  That image on the left is taken off a Marshall Valvestate schematic.

You cannot view this attachment.