Welcome to Solid State Guitar Amp Forum | DIY Guitar Amplifiers. Please login or sign up.

Recent Posts

 

Solid State Sleuths (Episode One)

Started by saturated, November 13, 2026, 07:29:42 PM

Previous topic - Next topic

saturated

#15
Seems like testing zener voltage levels might not be a healthy way to go for a transistor that you might want to save

Oh well let's do it  :dbtu:

So much for that plan

I used this circuit and applied voltage

You cannot view this attachment.

Slowly applying voltage up to 10V until.... nothing happened

You cannot view this attachment.

Maybe use a smaller resistor

I checked my connections

I hate to just bbq the poor thing


Welcome to ssguitar.com

Where YOU become the PRO !

saturated

I changed R1 to a 1.7 ohm resistor and didn't get any different results

I figured maybe this TO-220 might be too much of a beast so I tried a 2N3904 and got some results

You cannot view this attachment.

 :tu:

Question is...is that little 2N3904 still good  xP
Welcome to ssguitar.com

Where YOU become the PRO !

g1

Yes, NPN bi-polar like JM said.  The readings show that pin1 is the base.  Long ago someone told me that the higher forward reading will be the emitter, and in practice I have found this to be true (your readings .530 for emitter vs .523 for collector).
The reason I asked for the reverse readings is that voltage regulators will not usually give the same high readings in the reverse direction ("OL" or "1" on your meter).  So if there would have been some readings of 1.2 or 1.5 on the diode test I would have suspected it to be a voltage regulator.

g1

Now having said that, I'm a bit suspicious about the "1" readings on your diode test.  What does it read (on diode test) when the probes are not connected to anything?
Most meters are able to read more than a 1V drop on diode test but maybe not yours.

saturated

As requested

You cannot view this attachment.

Retest

You cannot view this attachment.

You cannot view this attachment.



You cannot view this attachment.
Welcome to ssguitar.com

Where YOU become the PRO !

saturated

Quote from: g1 on November 15, 2026, 02:56:01 PMLong ago someone told me that the higher forward reading will be the emitter, and in practice I have found this to be true (your readings .530 for emitter vs .523 for collector).

This seems to be EXCELLENT ADVICE  :tu:

I grabbed a couple more old pulls and did the test then checked with the peak atlas

(I think I had the BD140 turned around at first)

You cannot view this attachment.

What's crazy is the difference of only a couple mV and it still works
Welcome to ssguitar.com

Where YOU become the PRO !

saturated

Time to test it out on one of the big boys  :tu:

You cannot view this attachment.

You cannot view this attachment.

 :dbtu:

Welcome to ssguitar.com

Where YOU become the PRO !

g1

I checked the spec on your meter, and it does only go to 1V on the diode test, as indicated when you have nothing connected.
This is a bit unfortunate, you can't measure darlingtons (they have double diode between base and emitter, and you can't measure LED's that have more than a 1V forward drop.  Also, it won't pick up leakage over 1V when diode is reverse biased.
As an example, the Meterman 310HD will do diode test up to 2V.  If I see a reversed diode at 1.5 or something less than 'OL' I usually consider it bad. 

Some of the modern CREE Led's take around 2V to turn on.  It's nice to be able to test them with the meter rather than hook up a battery and resistor.

As long as you are aware of the limitations you should be fine.  Especially since you have the transistor tester to double check with.

saturated

Yes sir thanks

I want to say I imagine stuff that you guys know might be possibly considered "trade secrets" so I like to respect that and consider any info a gift I want to tread lightly I don't expect people who make this their livelihood and or passion etc to surrender every thing they know so I appreciate it  :tu:

In return it's nice to think I learned a few things sure it's great to look up transistor testing with a multimeter and go through the steps too

Btw any time you guys are ready for the big reveal  :dbtu:  :lmao:
Welcome to ssguitar.com

Where YOU become the PRO !