Welcome to Solid State Guitar Amp Forum | DIY Guitar Amplifiers. Please login or sign up.

Recent Posts

 

DIY Discrete Solid State Guitar Amp

Started by branko_76, June 03, 2026, 11:28:06 AM

Previous topic - Next topic

Kaz Kylheku

Quote from: Loudthud on June 19, 2026, 02:31:20 AMAlso, this schematic has no short circuit protection so shorting the output could damage the output transistors. I have newer versions but they are a little more complicated.

Have you thought about a dual supply version, DC coupled to speaker?
ADA MP-1 Mailing ListMusic DIY Mailing List
https://www.kylheku.com/mp1https://www.kylheku.com/music-diy

Loudthud

#16
Quote from: Kaz Kylheku on June 19, 2026, 02:19:06 PMHave you thought about a dual supply version, DC coupled to speaker?

It's the simplicity of a single Voltage gain stage without global feedback that makes the amp sound more like a tube amp. Cap coupled outputs just sound better. DC coupled outputs are why transistor amps sound bad.

MEF is back. Check this thread:
https://music-electronics-forum.com/forum/amplification/guitar-amps/theory-design/49294-