Problem #1

[saturated]

I came across this problem in a book and I admit becoming a deer in the headlights 

You cannot view this attachment.

I remember looking at the answer and not liking it  though I do not recall

Initially I proposed that current can only flow in one direction and when the cathode end is negative then current will flow.

But the cathode end is also connected to ground  sooooo how's it gonna be negative 

I welcome as usual any advice hints speculation solutions discussion etc

The good news is I'm going to construct this circuit I have a few transformers and can put some low voltage like 6 to 12 volts on the secondary 

I'm still a bit hesitant to ground one terminal of the secondary 

But that's the good thing is i can simply build it and not take chances like have a fuse etc

And that's what I like is I don't have to stare at something for days trying to make sense of it or accept it when I have the components and test equipment to actually see what happens 

[g1]

The cathode is not grounded.  Think about how an inductor reacts to AC.
The question is a bit misleading as it implies there will be DC at the cathode, I would not call it exactly that.

[saturated]

Yes sir thanks 

Ok guys I finally got around to trying to physically reproduce this scenario 

First order of business was (safely) connecting mains to a transformer which was cool because I got some training on three prong plug 🔌 pinout

When I connected to the 120v primaries I got about 28v output so I tried the 240 primary and got a nice 14v output



I took a few pics but I'm told they are too large so IDK if this is something temporary or maybe I can change the settings on my phone.

Anyhow now I just need to solder some breadboard friendly leads on to my secondaries and it's gonna be on 

I tried this pic and I can upload it idk why it's less MB than the others 

You cannot view this attachment.

[saturated]

I'm gonna have to think about this one for a while 

I started with multimeter readings and they were crazy 

So time to look with a scope


This is the anode side

You cannot view this attachment.

And the cathode side

You cannot view this attachment.

Sorry the camera only got partial wave forms

[saturated]

DC readings

You cannot view this attachment.

 

At least I have a purpose in life now.  To figure out why I'm getting six volts Vf across a diode.
I'm guessing maybe the "DC" on the cathode side is getting cancelled out idk
But it's cool 😎