Realistic MPA-100

[g1]

The cap has the 4 as a multiplier, not as a digit.  So 33 with 4 zeroes, in pF.
For the transistor sub, power and current & Hfe look ok but I don't think the Vceo of the TTC015B is sufficient.  I would look for the TTC004B.

[saturated]

Yes sir thanks also I think I learned 1H means 50 v DC 

[saturated]

Ok
Got my transistors in yesterday so today didn't have a lot of time but hey onward we go

Anyhow wife gave me too much coffee so I had some hella jitters trying to get this in

Also I verified pinout etc

You cannot view this attachment.

And the ugly truth

Oh yeah that nut that was glued to the board and fell off added to the entertainment

You cannot view this attachment.

I did not have tons of confidence in this install so I checked for continuity but fingers crossed apparently no solder bridges

So now just waiting on my capaci-TATERS   

[saturated]

Too much fun

Just had a cow looking at the collector which appears to be touching the heatsink 

Anyhow I did some more continuity tests and I think it's ok but yeah gonna have to pay attention to stuff like that

You cannot view this attachment.