collapse

Author Topic: I want to ask a question  (Read 152 times)

Jmatt

  • Chipper
  • *
  • Posts: 2
  • Chip Points: 0
    • View Profile
I want to ask a question
« on: October 11, 2019, 01:32:20 PM »
I screwed up and would like to know how to make it right.
I accidentally shorted out my speaker output wires together on my old amp and now it makes a funny noise. It's a kmd with a 12 in. Celestion. The model num. Is gone off the sticker but I got pics any help would be greatly appreciated
Thanks in advance.     JM

phatt

  • Legendary
  • ******
  • Posts: 2032
  • Chip Points: 239
    • View Profile
Re: I want to ask a question
« Reply #1 on: October 11, 2019, 07:23:27 PM »
There are likely quite a few small amps like yours that don't have short circuit protection on the output, so likely you have blown the output transistors.
Pull the chassis and take some pictures of the internals and some here might know how to fix the issue.
Phil.

Jmatt

  • Chipper
  • *
  • Posts: 2
  • Chip Points: 0
    • View Profile
Re: I want to ask a question
« Reply #2 on: October 11, 2019, 10:47:17 PM »
Thanx Phil for the reply
The chasis is a gs 65D and there is a fuse that is blown inside. The fuse is 3.5A.

 

* User Controls

 
 
Welcome, Guest. Please login or register.
Did you miss your activation email?

* Recent Posts

Peavey Audition Plus by Enzo
[October 16, 2019, 10:44:21 PM]


Carlsbro Hornet (1970s) by psafloyd
[October 16, 2019, 11:37:28 AM]


Thoughts on the difference in sound between tubes and solid state by jfetter
[October 15, 2019, 07:59:26 AM]


I want to ask a question by Jmatt
[October 11, 2019, 10:47:17 PM]


Does A500 mean 500 ohms or 500k ohm by slimjohnny
[October 11, 2019, 07:11:19 PM]

* Sponsors