collapse

Author Topic: Lab Series L3  (Read 478 times)

jman

  • Chipper
  • *
  • Posts: 4
  • Chip Points: 0
    • View Profile
Lab Series L3
« on: July 10, 2019, 09:33:46 PM »
Can some one tell me how to set the bias on a lab series L3 Amp.

Jazz P Bass

  • Elite
  • ****
  • Posts: 164
  • Chip Points: 13
    • View Profile
Re: Lab Series L3
« Reply #1 on: July 11, 2019, 11:18:09 AM »
I can't seem to put my finger on the L3 schematic.

If it is anything like the L5/L7, then the bias is fixed.
3mv across any output ballast resistor.
http://www.rru.com/~meo/Guitar/Amps/Lab/schem.html

edvard

  • Regular
  • **
  • Posts: 30
  • Chip Points: 0
    • View Profile
Re: Lab Series L3
« Reply #2 on: July 11, 2019, 09:33:15 PM »
Try this: 
https://mega.nz/#!1ph3CSrY!44oxSuZl6oZOZnnXJ12ikMNFncLJ2-AqZqEFzqUrnKg

Interesting schematic, that L3; it uses a CD4007 strung up to use the top half of it's 3 inverters as P-MOSFETs running the tone controls and another for the reverb driver/master out.
I don't see anywhere that counts as adjustable bias, but I could be wrong...

Jazz P Bass

  • Elite
  • ****
  • Posts: 164
  • Chip Points: 13
    • View Profile
Re: Lab Series L3
« Reply #3 on: July 12, 2019, 12:51:42 PM »
Nice find on the L3 schematic, PE.

It appears that R9 is a variable resistor for idle current adjustment.

Measuring the voltage drop across R16, 0.22 ohm ballast resistor, will give you your bias voltage.

jman

  • Chipper
  • *
  • Posts: 4
  • Chip Points: 0
    • View Profile
Re: Lab Series L3
« Reply #4 on: July 12, 2019, 11:02:11 PM »
Thanks for all the info.

 

* User Controls

 
 
Welcome, Guest. Please login or register.
Did you miss your activation email?

* Recent Posts

Fender Mustang II v.2 by Enzo
[December 08, 2019, 04:46:37 PM]


Eight Audio Kit TDA7294 and TDA2050 from India by g1
[December 08, 2019, 03:11:47 PM]


signal tracing by Crich
[December 07, 2019, 07:43:20 PM]


The Dangers of Speaker Impedance Mismatching by Enzo
[December 05, 2019, 11:44:14 AM]


Gallien Kruger GT200 by gbono
[December 04, 2019, 02:54:12 PM]

* Sponsors