Solid State Guitar Amp Forum | DIY Guitar Amplifiers

Please login or register.

Login with username, password and session length
Advanced search  

News:

SSGuitar has moved to PHP 7.1, enjoy the speed!

collapse
Pages: [1]   Go Down

Author Topic: My Crate FXT30 died. Schematics, or ideas please?  (Read 326 times)

Disco658

  • Chipper
  • *
  • Chip Points: 0
  • Posts: 1
    • View Profile
My Crate FXT30 died. Schematics, or ideas please?
« on: September 09, 2018, 03:20:11 AM »

I bought it used, tried it once quick before I packed up and moved, now it does nothing but hum, with or without a guitar plugged in. There's a slight smell emanating from the vent holes; smells like cooked components. Haven't had a chance to open it up yet. No explanation for a cause.
Logged

edvard

  • SSGuitar Regular
  • ***
  • Chip Points: 0
  • Posts: 19
    • View Profile
Re: My Crate FXT30 died. Schematics, or ideas please?
« Reply #1 on: September 10, 2018, 01:00:54 AM »

I fried a Crate Mini-stack yeeeeeeeeaaaaaaars ago by accidentally plugging the speaker outs into each other.  Smoke smell and buzz were the result.  I'll hazard a guess that it's the same thing here.  If you open it up, you'll most likely find a chip-amp handling the speaker output, and the smoke will have escaped.  First thing I'd do is replace the chipamp and the output capacitor, then work backwards from there if that doesn't cure it.  I couldn't find any schematics or specs to suss out what variety of chipamp is loaded in there, but talk around the 'net says contact Crate and they can advise you on that detail.

Are you handy with tools and a soldering iron?
Logged

g1

  • Legendary
  • ******
  • Chip Points: 67
  • Posts: 551
    • View Profile
Re: My Crate FXT30 died. Schematics, or ideas please?
« Reply #2 on: September 10, 2018, 12:28:41 PM »

Logged

Jazz P Bass

  • Elite SSGuitarist
  • *****
  • Chip Points: 9
  • Posts: 102
    • View Profile
Re: My Crate FXT30 died. Schematics, or ideas please?
« Reply #3 on: September 10, 2018, 12:48:32 PM »

If it is the TDA2050 chip amp that is bad, they are no longer manufactured.

A valid substitute is the LM1875.
Drop in replacement.

I have attached the schematic.
Logged
Pages: [1]   Go Up
 

* User Controls
 
 
Welcome, Guest. Please login or register.
Did you miss your activation email?
* Recent Posts
kustom KAA-65 service manual by Jazz P Bass
[Today at 08:08:59 AM]


Marshall 3005/Lead 12 Power Trans Question by phatt
[November 17, 2018, 01:48:36 AM]


Roland JC-120: no effects working, any tips? by phatt
[November 17, 2018, 01:42:11 AM]


Sunn Beta Lead Input Switching Issues by edvard
[November 16, 2018, 12:59:21 AM]


Hybrid valve and TPA311x by jfetter
[November 15, 2018, 07:52:42 PM]

* Sponsors