collapse

Author Topic: Chorus Pedal Help  (Read 1012 times)

jammy5152

  • Regular
  • **
  • Posts: 13
  • Chip Points: 1
    • View Profile
Chorus Pedal Help
« on: June 27, 2018, 09:37:14 AM »
I have a chorus Pedal that I’m looking at and I need to repair it so a 9 volt battery will work in it...
It will work with a 9 volt power supply plug- in but NOT with a battery
I’m a newbie at this :dbtu:
Thanks for your help.....

Jazz P Bass

  • Elite
  • ****
  • Posts: 153
  • Chip Points: 12
    • View Profile
Re: Chorus Pedal Help
« Reply #1 on: June 27, 2018, 11:09:19 AM »
Please supply the name of the pedal and the schematic.

phatt

  • Legendary
  • ******
  • Posts: 2029
  • Chip Points: 239
    • View Profile
Re: Chorus Pedal Help
« Reply #2 on: June 28, 2018, 07:25:04 AM »
The most likely culprit;
That external power socket has a switch inside which engages the battery circuit when external power plug is removed,, it maybe broken.
And check the battery snap connector,, the wires inside the snap cover can break.
Use a DMM to check for continuity of battery circuit.
Phil.

jammy5152

  • Regular
  • **
  • Posts: 13
  • Chip Points: 1
    • View Profile
Re: Chorus Pedal Help
« Reply #3 on: June 30, 2018, 06:08:45 PM »
It’s a Digitech Hardwire...

 

* User Controls

 
 
Welcome, Guest. Please login or register.
Did you miss your activation email?

* Recent Posts

Z-MATCHER 100W IMPEDANCE MATCHER by Loudthud
[September 16, 2019, 04:42:44 PM]


Hybrid valve and TPA311x by jfetter
[September 13, 2019, 03:29:50 PM]


Marshall 5010 Needs Help by Jazz P Bass
[September 13, 2019, 12:12:27 AM]


Do you need a low pass filter in your amp when you already have the eq? by slimjohnny
[September 11, 2019, 06:01:57 AM]


Gallien Kruger GT200 by mandu
[September 10, 2019, 06:31:10 AM]

* Sponsors