collapse

Author Topic: Chorus Pedal Help  (Read 1131 times)

jammy5152

  • Regular
  • **
  • Posts: 13
  • Chip Points: 1
    • View Profile
Chorus Pedal Help
« on: June 27, 2018, 09:37:14 AM »
I have a chorus Pedal that I’m looking at and I need to repair it so a 9 volt battery will work in it...
It will work with a 9 volt power supply plug- in but NOT with a battery
I’m a newbie at this :dbtu:
Thanks for your help.....

Jazz P Bass

  • Elite
  • ****
  • Posts: 163
  • Chip Points: 13
    • View Profile
Re: Chorus Pedal Help
« Reply #1 on: June 27, 2018, 11:09:19 AM »
Please supply the name of the pedal and the schematic.

phatt

  • Legendary
  • ******
  • Posts: 2037
  • Chip Points: 241
    • View Profile
Re: Chorus Pedal Help
« Reply #2 on: June 28, 2018, 07:25:04 AM »
The most likely culprit;
That external power socket has a switch inside which engages the battery circuit when external power plug is removed,, it maybe broken.
And check the battery snap connector,, the wires inside the snap cover can break.
Use a DMM to check for continuity of battery circuit.
Phil.

jammy5152

  • Regular
  • **
  • Posts: 13
  • Chip Points: 1
    • View Profile
Re: Chorus Pedal Help
« Reply #3 on: June 30, 2018, 06:08:45 PM »
It’s a Digitech Hardwire...

 

* User Controls

 
 
Welcome, Guest. Please login or register.
Did you miss your activation email?

* Recent Posts

Fender Mustang II v.2 by phatt
[Today at 06:08:35 AM]


signal tracing by Crich
[December 07, 2019, 07:43:20 PM]


Eight Audio Kit TDA7294 and TDA2050 from India by Enzo
[December 07, 2019, 05:25:56 PM]


The Dangers of Speaker Impedance Mismatching by Enzo
[December 05, 2019, 11:44:14 AM]


Gallien Kruger GT200 by gbono
[December 04, 2019, 02:54:12 PM]

* Sponsors