Welcome, Guest. Please login or register.

September 27, 2020, 04:06:57 PM

Login with username, password and session length

Recent Posts

 

Author Topic: Gibson Maestro Reverb Echo speaker impedance  (Read 1525 times)

Hawk

  • Elite
  • ****
  • Posts: 223
  • Chip Points: 3
    • View Profile
Gibson Maestro Reverb Echo speaker impedance
« on: April 24, 2018, 09:50:25 AM »
I'm troubleshooting a Gibson Maestro Reverb Echo amp and wondering if anyone knows the impedance of the 8 inch speaker? It shows a very low resistance reading .7 ohms so I know it's done.
Thanks.

Enzo

  • Legendary
  • ******
  • Posts: 1977
  • Chip Points: 214
    • View Profile
Re: Gibson Maestro Reverb Echo speaker impedance
« Reply #1 on: April 24, 2018, 12:40:37 PM »
8 ohms is close enough for any amp in the world to run through.

Is this 0.7 ohms taken while the speaker is still connected to the amp?  If so, pull the wire off the speaker, as you would be measuring the output transformer winding, which has naturally VERY low resistance.

Hawk

  • Elite
  • ****
  • Posts: 223
  • Chip Points: 3
    • View Profile
Re: Gibson Maestro Reverb Echo speaker impedance
« Reply #2 on: April 25, 2018, 11:32:04 AM »
8 ohms is close enough for any amp in the world to run through.

Is this 0.7 ohms taken while the speaker is still connected to the amp?  If so, pull the wire off the speaker, as you would be measuring the output transformer winding, which has naturally VERY low resistance.
Thanks Enzo... lesson learned--speaker is good!

Sent from my XT1635-02 using Tapatalk