collapse

Author Topic: Confusion about Brian Wampler’s modified MXR Distortion Plus  (Read 3775 times)

SurreyNick

  • Regular
  • **
  • Posts: 29
  • Chip Points: 0
    • View Profile
Re: Confusion about Brian Wampler’s modified MXR Distortion Plus
« Reply #15 on: March 15, 2018, 05:53:50 PM »
Mmm. That's seems to be pretty much ideal. Thanks  :)

I think I'll still build the modified MXR, just because I've come this far thanks to all the help I've had here.  I'll post a picture up once it's built. Then I'll have a go at tackling this 20 watt beastie  :tu:


SurreyNick

  • Regular
  • **
  • Posts: 29
  • Chip Points: 0
    • View Profile
Re: Confusion about Brian Wampler’s modified MXR Distortion Plus
« Reply #16 on: March 18, 2018, 11:28:59 AM »
Just gathering the components together for the build and I find contradictory recommendations for the pots and jack sockets.

In a couple of blogs/threads authors recommend a stereo socket for the input and I can't see why.  Most others recommend mono for input and output.  Is there any reason for a stereo input?

When it comes to Pots, for the Gain pot the original DIY MXR spec calls for a reverse log pot, but in a lot of threads/blogs there are various recommendations for log pots and also for linear audio taper pots.  There are three pots needed: One for Gain (1M ohm), one for Volume (500K), and one for Tone (1M).  I can find a 1M reverse log pot but the max power rating is just 0.1W and I don't know if this is sufficient.  For the best result what should I use?

Thanks

 

* User Controls

 
 
Welcome, Guest. Please login or register.
Did you miss your activation email?

* Recent Posts

Fender Mustang II v.2 by scottishmac2012
[Today at 04:35:09 AM]


signal tracing by Crich
[December 07, 2019, 07:43:20 PM]


Eight Audio Kit TDA7294 and TDA2050 from India by Enzo
[December 07, 2019, 05:25:56 PM]


The Dangers of Speaker Impedance Mismatching by Enzo
[December 05, 2019, 11:44:14 AM]


Gallien Kruger GT200 by gbono
[December 04, 2019, 02:54:12 PM]

* Sponsors