VOX AC30 Solid State problemi collegamento VIBRATO

[casarete]

Hello to all,
sorry if I intrude, but I wanted to ask your advice because I have a problem with my VOX AC30SS ..
I have a cable connection problem of VIBRATO tab, I do not understand how to connect and restore the transformer wires ..
You can help you understand how to connect them?
I hope he was not too pushy, eventually, I apologize and I open new thread.

photo:

https://www.flickr.com/photos/132367757@N08/31972016600/in/dateposted-public/
https://www.flickr.com/photos/132367757@N08/32198731352/in/dateposted-public/
https://www.flickr.com/photos/132367757@N08/32228864471/in/dateposted-public/
https://www.flickr.com/photos/132367757@N08/32198698972/in/dateposted-public/

Thank you in advance for your response and the help

[J M Fahey]

This is the official schematic, use it to find where your loose wire comes from, and find where it should go.
Very poor scan, but almost readable; for muddy values ask here and we might guess them.


NOTE: I saw some terrible soldered joints in some of your pictures, I suggest a Tech helps you identify wiring and properly solder whatever is needed; as seen that amplifier is a fire hazard.