collapse

Author Topic: Add FX loop to Pathfinder  (Read 1128 times)

mladenu

  • Regular
  • **
  • Posts: 31
  • Chip Points: 0
    • View Profile
Add FX loop to Pathfinder
« on: December 19, 2015, 07:04:20 PM »
Well, i plan to add reverb pedal to this little Vox, and maybe would know where to predict FX return, but will leave this enigma to some of ssguitar expert which would be kind to explain me that...

And here is schematic:

phatt

  • Legendary
  • ******
  • Posts: 2036
  • Chip Points: 241
    • View Profile
Re: Add FX loop to Pathfinder
« Reply #1 on: December 19, 2015, 07:21:48 PM »
After U2A,, before power chip.
Frankly I doubt much benefit would be forth coming,,,I'd just plug your Rev pedal in front.
Phil.

J M Fahey

  • SSGuitar Global Mod
  • Legendary
  • ****
  • Posts: 4142
  • Chip Points: 429
    • View Profile
Re: Add FX loop to Pathfinder
« Reply #2 on: December 20, 2015, 08:56:03 AM »
Agree and add: either before or after last Volume control (P4)

Start by lifting right end of R18, send that to Send Jack, then from Return jack to top of P4 .

If it works properly, fine.

If signal level too high and it clips your Reverb (which would defeat the porpose of the Loop, wouldn't it?  ;) ) ,then you'll have to cut the track leaving P4 wiper and splice/graft/kludge your jacks there.

Again agree that you *might*  not get much in return, the beauty is that you can *test*  it without comitting yourself deeply, *before*  drilling jack holes and such.

 

* User Controls

 
 
Welcome, Guest. Please login or register.
Did you miss your activation email?

* Recent Posts

Eight Audio Kit TDA7294 and TDA2050 from India by Enzo
[Today at 08:10:57 PM]


The Dangers of Speaker Impedance Mismatching by Enzo
[Today at 11:44:14 AM]


Gallien Kruger GT200 by gbono
[December 04, 2019, 02:54:12 PM]


Peavey Classic VT by Enzo
[December 02, 2019, 09:16:10 PM]


So you need a preamp - here are your options by flester
[November 29, 2019, 05:44:46 AM]

* Sponsors