Welcome, Guest. Please login or register.
Did you miss your activation email?

February 22, 2020, 05:45:15 AM

Login with username, password and session length

Recent Posts

Author Topic: Wiring 2 speakers for 4/8/16 ohms switchable?  (Read 6048 times)

galaxiex

  • Legendary
  • ******
  • Posts: 519
  • Chip Points: 46
    • View Profile
Re: Wiring 2 speakers for 4/8/16 ohms switchable?
« Reply #15 on: October 25, 2015, 09:58:42 AM »
This type of thing is done. It's called a "Passive Radiator".... but it has very specific design requirements.
Typically used in sub woofers, tho I have seen them in small-ish bookshelf speakers.
The passive radiator design requires a sealed box to operate properly.
In a un-sealed box the results will be unpredictable but it will probably act as phatt has said...

Quote
...non working speaker becomes a flapping piece of cardboard...

Not to mention the fact that the box is likely not "tuned" in any way to the speaker(s) parameters.

Please note in the link below they say..."When used properly"

http://www.centerpointaudio.com/passiveradiators.aspx
« Last Edit: October 25, 2015, 10:01:13 AM by galaxiex »
Fear leads to Anger, Anger leads to Hate, Hate leads to Suffering.