Fender RocPro 700 (hard clipping)

[MrMojo]

On the Fender 700 you may also want to check the solder points on the two large caps at the rear of the chassis....I have worked on 2 of these amps and on both the caps were not making good contact....resoldered them and the problem was gone..Been working fine for now for a cpl years......

[DrGonz78]

A few years ago I had a RocPro 700 that was having this exact issue. At first I thought it was the speaker. Went through everything but couldn't figure out why it was misbehaving. After installing the 47pf or something close it finally sounded like an amp again. So yes this seems like a bandaid repair but it certainly solved the issue.