Welcome, Guest. Please login or register.

August 07, 2020, 05:57:10 AM

Login with username, password and session length

Recent Posts

 

Author Topic: Fender RocPro 700 (hard clipping)  (Read 8065 times)

MrMojo

  • Chipper
  • *
  • Posts: 2
  • Chip Points: 0
    • View Profile
Re: Fender RocPro 700 (hard clipping)
« Reply #15 on: June 21, 2015, 02:38:09 PM »
On the Fender 700 you may also want to check the solder points on the two large caps at the rear of the chassis....I have worked on 2 of these amps and on both the caps were not making good contact....resoldered them and the problem was gone..Been working fine for now for a cpl years......