* * *

User Controls

Welcome, Guest. Please login or register.

March 02, 2021, 02:48:28 AM

Login with username, password and session length

Recent Posts

 

« previous next »
Pages: [1]   Go Down

Author Topic: Fender SR8300P Powered Mixer Schematic  (Read 8550 times)

gearhead63

  • Regular
  • **
  • Posts: 12
  • Chip Points: 3
    • View Profile
Fender SR8300P Powered Mixer Schematic
« on: June 21, 2014, 10:29:22 PM »
Took me a while but I found this so I could fix this mixer.
Logged

Loudthud

  • Elite
  • ****
  • Posts: 257
  • Chip Points: 40
    • View Profile
Re: Fender SR8300P Powered Mixer Schematic
« Reply #1 on: June 23, 2014, 04:05:08 PM »
Adobe Reader XI gave me an error and wouldn't open the file.
Logged

Roly

  • Legendary
  • ******
  • Posts: 2184
  • Chip Points: 288
    • View Profile
    • Australian Valve Amps
Re: Fender SR8300P Powered Mixer Schematic
« Reply #2 on: June 24, 2014, 06:55:22 AM »
No problems in Nuance PDF reader.

The output stage is ... um ... a bit full-blooded.   ???
Logged
If you say theory and practice don't agree you haven't applied enough theory.

gearhead63

  • Regular
  • **
  • Posts: 12
  • Chip Points: 3
    • View Profile
Re: Fender SR8300P Powered Mixer Schematic
« Reply #3 on: July 04, 2014, 06:09:28 PM »
I just downloaded and opened it with no problem!
Logged

Racman

  • Chipper
  • *
  • Posts: 1
  • Chip Points: 0
    • View Profile
Re: Fender SR8300P Powered Mixer Schematic
« Reply #4 on: September 10, 2014, 05:40:47 PM »
Nevermind!   :loco  I see it now that I'm logged in. Thanks!! This will help a lot!

I have blown outputs on this PA System and a popped run. Really would like to get a schematic and go through this thing before putting back in action. I don't see a link for this manual, can anyone help me out?

Thanks,
Rac
« Last Edit: September 10, 2014, 05:58:26 PM by Racman »
Logged

mrounsavall

  • Chipper
  • *
  • Posts: 1
  • Chip Points: 0
    • View Profile
Re: Fender SR8300P Powered Mixer Schematic
« Reply #5 on: October 21, 2018, 08:21:18 AM »
I NEED A PICTURE OF THE WIRING ON THE INSIDE OF A FENDER SR 6300P POWERED MIXER DESPERATELY! SOMEONE UN-DONE ALL THE WIRES IN MINE!!!  :-\ PLEASE HELP! THEANK YOU!
Logged

Jazz P Bass

  • Elite
  • ****
  • Posts: 265
  • Chip Points: 21
    • View Profile
Re: Fender SR8300P Powered Mixer Schematic
« Reply #6 on: October 21, 2018, 11:20:58 AM »
https://www.ssguitar.com/index.php?action=dlattach;topic=3501.0;attach=4607

All the information that you need is on the schematic.
Logged

Oscar

  • Chipper
  • *
  • Posts: 1
  • Chip Points: 0
    • View Profile
Re: Fender SR8300P Powered Mixer Schematic
« Reply #7 on: February 22, 2021, 11:39:47 PM »
Great Schematic just what I was looking for, have a bad amplifier with burn out R33 resistor reading over 600 Ohms and it should be 10 ohm 2Watts. Also burn out power transistors 2SC3281 (Q4,Q5,Q6 )and 2SA1302 (Q7,Q8,Q9).
Logged
Pages: [1]   Go Up
« previous next »