Welcome to Solid State Guitar Amp Forum | DIY Guitar Amplifiers. Please login or sign up.

March 28, 2024, 04:21:01 PM

Login with username, password and session length

Recent Posts

 

Whoops...messed up my line out voltage divider

Started by joecool85, February 17, 2014, 01:41:29 PM

Previous topic - Next topic

joecool85

Years ago I added a line out to my k-20x by using the 10k/1k voltage divider the k-20 used. Except evidently I wasn't paying full attention when I did it. I put the 10k inline from the positive speaker lead to tip on line out, then a 1k from the negative lead to line out sleeve. I should have put the 1k from tip to ground to complete the voltage divider. Luckily I only ever drove a lm 3886 with it. I'm going to fix this soon as I'll be in there anyway doing an IEC jack mod.
Life is what you make it.
Still rockin' the Dean Markley K-20X
thatraymond.com

phatt

Why not just replace the 1k Resistor with a 5 or 10k pot? :tu:
Phil.

joecool85

I wanted it to match the old k20. I fixed this last night actually.
Life is what you make it.
Still rockin' the Dean Markley K-20X
thatraymond.com