Welcome, Guest. Please login or register.

March 08, 2021, 04:27:30 PM

Login with username, password and session length

Recent Posts

 

Author Topic: JFET Emulation of triode limitation  (Read 8883 times)


rowdy_riemer

  • Elite
  • ****
  • Posts: 264
  • Chip Points: 13
    • View Profile
    • www.riemer.us
Re: JFET Emulation of triode limitation
« Reply #1 on: March 30, 2010, 03:25:00 PM »
The links to the sound clips aren't working.

HENK

  • Regular
  • **
  • Posts: 10
  • Chip Points: 0
    • View Profile
Re: JFET Emulation of triode limitation
« Reply #2 on: March 30, 2010, 03:34:32 PM »
3+4 are o.k. on a Mac

mensur

  • Master
  • ***
  • Posts: 94
  • Chip Points: 5
    • View Profile
Re: JFET Emulation of triode limitation
« Reply #3 on: March 30, 2010, 04:28:23 PM »
I put working samples.

rowdy_riemer

  • Elite
  • ****
  • Posts: 264
  • Chip Points: 13
    • View Profile
    • www.riemer.us
Re: JFET Emulation of triode limitation
« Reply #4 on: March 30, 2010, 08:25:28 PM »
Thx, dude. I can open those samples just fine.

phatt

  • Legendary
  • ******
  • Posts: 2182
  • Chip Points: 266
    • View Profile
Re: JFET Emulation of triode limitation
« Reply #5 on: April 01, 2010, 10:56:46 AM »
Just did some quick simulations.
With or without *diodes* the waveform is identical?

With 100k Drain R's the circuit will be asymetrical anyway, So I don't quite get it.
A tad confusing artical to read.

Also all those pedals have Cabsim inbuilt and judging by the clips at *AMT* those cabsims are in use the whole time. I admit it does sound good.
(JCM 800 very nice)

*mensur*,
can I ask, was there a point to this post?
Have I missed the point? LOL.

IMO Any dist will sound more convincing through a good cabsim.

Having built whole Fet preamp circuits with 3SK30A Fets running from 37VDC I will simply say that there not all they are cracked up to be.

The best use I found for Fets was the mu booster type pedal Which I still use BTW.
Cheers Phil.