Faulty multimeter

[saturated]

Picked up this multimeter known to be not working

Had no display whatsoever

Hoped it was a dead battery 

Opened it up.  No battery 

Installed new battery....only display on certain modes.   

Checked internal $30 fuse.  Open 

Installed new fuse.  Fingers crossed.  No change 

Connected mini-grabbers and 150 ohm resistor

Continuity mode.  Nothing

You cannot view this attachment.

200 ohm range
Working

You cannot view this attachment.

2000 ohm range
Working

You cannot view this attachment.

20,000 ohm range
Working

You cannot view this attachment.

200 kohm range

Back to nothing 

You cannot view this attachment.

Not really equipped to diagnose or repair tiny surface mount stuff.

 

[g1]

I would see if you can verify switch contacts for bad ranges/functions.