I removed all the Transistors from the circuit and tested them with my multimeter and they check out.  What would be the best way to test the power supply filter Capacitors?  And will they need to be removed from the circuit also?

Thanks

Clint

Hey folks first post for me so i thought id make it a good one for you all. 

I was shopping around my local music stores looking for some old amp chassis that i could use for my LM3886 guitar amp project.  I found a shop that had a few "junk" combo amps and they also gave me a Fender SRM 6302 powered mixer.  The Fender was completely intacked and the store owner said he doesn't even remember why they had it.  I thought i would see if i could get it working again.  So i plugged it into a junk speaker i have and a loud buzz around 100hz or so (maybe a bit higher) was all it would do.  Until the speaker coil got hot enough to start to distort.  I disconnected the preamp section and the buzz is still there.  So my question is where should i start my diagnosis?  If i could get this thing working it would be a nice practice head for my friends band.

Thanks in advance for any and all help.

Clint