I have a Baldwin Professional that has "smoked" two of the six (6) R47 wires that are soldered on the lugs bolted across the rear of the heatsink of the TO-3's. What is going on? and what would replace them with?(after I fix the problem).
A knurled nut & 8-32 bolt fell out from where it was wedged between the Ch.2 board and the chassis (Ch.2 had not worked before - zero/nada). Now both channels "work", but are weak & distorted.
A knurled nut & 8-32 bolt fell out from where it was wedged between the Ch.2 board and the chassis (Ch.2 had not worked before - zero/nada). Now both channels "work", but are weak & distorted.