Hi all, I hope I'm adding to this thread rather than stealing it!
First time post, after lurking for a while. Sorry in advance for the newbie questions. You're a patient bunch!
I decided i wanted to build a small, funky combo for home use, something I can get a good blues tone out of at apartment levels. After finding an old sewing machine case with outrageous tolex, I figured I'd buy a Valve Junior head with a Supro mod kit and call it done, but ultimately it would still be too loud for home, and I'd already done something similar. So I guess I'm looking for a new challenge. I've modded a VJ and built a few pedals, and am comfortable with a soldering iron. me & schematics are still getting to know each other.
I found the Tiny Giant amp kit while poking around & after a bit of thinking, I thought that using a Supreaux Deux kit from ROG would be the ticket (http://www.runoffgroove.com/sd.html). I just received both the TG & the Supreaux Deux PCBs (the latter nicely done by one of the guys at DIYStompboxes, John Lyons). Match that with an old 6x9 elliptical Rola, and it's silicon heaven, I think.
My idea is pretty simple - for you guys!
- An input that accesses the preamp (done :-)
- An input that bypasses the preamp & connects directly to the power amp, so I could use different stompboxes, or Amplitube, etc.
- Drive & Tone from the Supreaux preamp & optionally leave off its volume. Power amp would have a volume as it's designed.
- A speaker out that would disconnect the internal speaker.
http://www.ssguitar.com/index.php?topic=651.0 has lots of good info, but it's way over this minnow's head.
I'll have separate power supplies to power both the pre & power amps, and I've discussed with Taylor how to connect the preamp to the Tiny Giant. What I don't know how to do is what kind of jack to use for the poweramp in & where to insert it, and where to insert the speaker out (well, really line out). Also, is it worth leaving off the preamp volume?
Thanks in advance for the advice & this great forum!
First time post, after lurking for a while. Sorry in advance for the newbie questions. You're a patient bunch!
I decided i wanted to build a small, funky combo for home use, something I can get a good blues tone out of at apartment levels. After finding an old sewing machine case with outrageous tolex, I figured I'd buy a Valve Junior head with a Supro mod kit and call it done, but ultimately it would still be too loud for home, and I'd already done something similar. So I guess I'm looking for a new challenge. I've modded a VJ and built a few pedals, and am comfortable with a soldering iron. me & schematics are still getting to know each other.
I found the Tiny Giant amp kit while poking around & after a bit of thinking, I thought that using a Supreaux Deux kit from ROG would be the ticket (http://www.runoffgroove.com/sd.html). I just received both the TG & the Supreaux Deux PCBs (the latter nicely done by one of the guys at DIYStompboxes, John Lyons). Match that with an old 6x9 elliptical Rola, and it's silicon heaven, I think.
My idea is pretty simple - for you guys!
- An input that accesses the preamp (done :-)
- An input that bypasses the preamp & connects directly to the power amp, so I could use different stompboxes, or Amplitube, etc.
- Drive & Tone from the Supreaux preamp & optionally leave off its volume. Power amp would have a volume as it's designed.
- A speaker out that would disconnect the internal speaker.
http://www.ssguitar.com/index.php?topic=651.0 has lots of good info, but it's way over this minnow's head.
I'll have separate power supplies to power both the pre & power amps, and I've discussed with Taylor how to connect the preamp to the Tiny Giant. What I don't know how to do is what kind of jack to use for the poweramp in & where to insert it, and where to insert the speaker out (well, really line out). Also, is it worth leaving off the preamp volume?
Thanks in advance for the advice & this great forum!