Hello everyone.
I will start to apologize for my english, i'm a Swede so bare with me.

Im sitting here researching how to modify my peavey classic 30 combo amp, and i found a good guide called the blue mod.
The guide links to several webpages that carries all the electrical components to make this modification.
The problem im having is that these websites are all located in the states, and i live in Sweden.
I've made an order from a big firm that carries lots of different condenser/capacitators/resistors, but some of the components needed are not available.

The salesman at the company suggested that i could buy a different kind of capacitator, the question i have is, will work if i switch to the ones they had available?
The capacitators i need are called mica capacitator, and they are ranging from 270pf to about 1000pf, the answer i got to my request from the salesman is:

The capacitators you needed are of the mica-type, they are called glimmercapacitators. The closest thing to these capacitators that we have in stock are polypropylen. Do you want this type or axial (round with pins from both sides)?

I hope i'm making myself understood, there are some words in english that i dont know if i've translated correctly.

Thankful for help.

Regards

Hello.

I'm new to this forum and guitar amp builds in general and i would like some tips on building an amp.

I do not have that much knowledge on amps, but i want to build a tubeamp.
I will use the amp to play with some friends and i need enough power to be heard over drums bass and another guitar.

The amp cannot be to expensive, the cheaper the better  , and i want it to sound something like the old guns n roses (marshall sound)
I have read some forums but i find kits for home use or for concerts....

I have looked at these amps, is this something anyone could recomend?
http://guitaramplifierpcbs.com/liteiib.aspx

/Regards Alexander