Thanks phatt!   

Hi All

I have an Ibanez TBX150H and it hums.  I have no idea why it should; I thought that was a valve amp characteristic.  Anybody know how I can get rid of the hum?  This amp sounds too great not to play.

Thanks for your input

Hi There

turns out the amp is still under warranty.  I am going to send it out.  Thanks again for the input  :dbtu:

Hey Guys

Quick update.  Yes the amp works with nothing in the effects loop.  When I try to add effects it goes back to sounding like crap.  I will probably have to replace the jacks.  but not now.  Thank you again for your input

The deoxit plan was a success!  Thank you very much for your help and expertise  :dbtu:

Thank you guys for the quick responses.  I will try the Deoxit plan this evening  :cheesy:

I got home and plugged in a cable as directed and it came back to life :dbtu:
Thanks!  Now how do I keep it that way?

Hi  J M Fahey

Just so I am clear:

plug one end of a good cable into the send jack and the other end into the receive jack.  Have my guitar in the guitar jack......correct?   

Hi all

I have Ibanez TBX150H and use it sparingly these days.  For those not familiar, it is a discontinued solid state head.  I thought I would play through it the other day and I mixed up my send and receive cables on the effects loop.  I usually power it off before I do that but I was in a hurry!  after doing that I lost all power it had.  I can hear guitar but only faintly.  I am waiting for Ibanez to offer me a viable solution. I think something happened to the power section.  Is there an easy way to tell?  If I did blow it up and it needs to be replaced, could I use a more powerful one?  It was a great sounding amp for a SS, but could not keep up in the volume department.

Thanks!