Print Page - BrianGT LM3886 kit and feedback resistor.

Title: BrianGT LM3886 kit and feedback resistor.
Post by: armstrom on May 20, 2008, 10:55:56 AM

This may sound odd... but is there a noticable difference in the sound quality of the amp if you mount the 22K feedback resistor in the thru-holes or directly on to the pins of the LM3886? I know early revisions of the board did not have holes for the resistor, but the rev B does... Any thoughts?
-Matt

Title: Re: BrianGT LM3886 kit and feedback resistor.
Post by: wazzy on May 27, 2008, 03:50:04 PM

i think the result is subjective, if you can hear the difference then there is one, to be honest i've never heard the difference.

Title: Re: BrianGT LM3886 kit and feedback resistor.
Post by: armstrom on May 28, 2008, 09:49:13 AM

Thanks. That's all I needed to know :) I'll just use the pads on the board.
-Matt

Solid State Guitar Amp Forum | DIY Guitar Amplifiers

Solid State Amplifiers => Amplifier Discussion => Topic started by: armstrom on May 20, 2008, 10:55:56 AM