Solid State Guitar Amp Forum | DIY Guitar Amplifiers
Solid State Amplifiers => The Newcomer's Forum => Topic started by: saturated on October 17, 2026, 09:16:29 PM
I removed this capacitor from the PS of a Craig 4201 23 channel base station
For some reason it fell under my suspicion and was removed
This was a while back and it's probably innocent
Time to exonerate?
Not having (or the room for) a sencore or tel-ohm mike or Heathkit etc I figured I could do a simple test to check for leakage
IMG_20261017_200929905 (1).jpg
So far it's holding up at 5V xP
IMG_20261017_201003302 (1).jpg
I'll increase the voltage ⚡ in intervals and see what happens
Or doesn't happen xP