Solid State Guitar Amp Forum | DIY Guitar Amplifiers
Solid State Amplifiers => The Newcomer's Forum => Topic started by: saturated on October 11, 2026, 09:35:46 PM
This looks pretty simple but I wanted to try it
IMG_20261011_202416183 (1).jpg
I did not find a 7505 but I did have a 7808ct so I hooked it up and went with it
Looks like I forgot about having the capacitor close xP
IMG_20261011_202038612.jpg
And the predictable results (I hope xP )
IMG_20261011_202407963 (1).jpg
It still was an eye opener seeing DC voltage appear at the output before the minimum input level
I wondered if the results might be wacked without a load resistor
Also at the end I felt the metal tab with my hand but it wasn't hot
Next I have to add some resistors and do some more stuff
Hmm now I hope these results agree with the data sheet xP