Solid State Guitar Amp Forum | DIY Guitar Amplifiers
Solid State Amplifiers => The Newcomer's Forum => Topic started by: titakti on June 12, 2012, 06:56:22 PM
What is involved to change my 2 prong plug to a 3 prong plug on a baldwin D1 amp.
You would need to replace the 2 wire power cable with a 3 wire version and wire in the white and black as per normal, then tie the green to the chassis as ground - it's that simple. Or, you could go above and beyond and use a IEC power jack (parts express #090-443 or mouser #562-719W-00/02) and detachable power cable.