Print Page - Gorilla GG-25 amp information wanted

Title: Gorilla GG-25 amp information wanted
Post by: Mark Hammer on September 10, 2009, 08:08:06 AM

I picked up one of these cheap at a music store yard sale, and was trying to spruce it up (dusting, pot cleaning, cabinet re-do). While it would be within my capacity to reverse engineer it (its a TDA2030-based unit), it's a royal PITA to disassemble and reassemble. Right now, the barrier separating it from functionality would appear to be an above-the-board connection between some soldering terminals that I foolishly kept no notes on.

If you have a schematic, or a gut shot or can simply tell me where thew wires go to on yours, I'd deeply appreciate it.

Title: Re: Gorilla GG-25 amp information wanted
Post by: J M Fahey on September 10, 2009, 04:29:41 PM

Hi Mark, sorry for what happened to you.
Anyway, you might post some pictures, they might help.

Title: Re: Gorilla GG-25 amp information wanted
Post by: Mark Hammer on September 11, 2009, 11:59:25 AM

You're right, it can work the other way too. I have to head out of town, but I'll try and post a pic or two when I get back.

Title: Re: Gorilla GG-25 amp information wanted
Post by: bluedog on November 01, 2009, 03:20:20 PM

Mark, did you ever get the pictures you needed? If not, I have some. Let me know if you want me to send them.

Thanks.

Solid State Guitar Amp Forum | DIY Guitar Amplifiers

Solid State Amplifiers => Amplifier Discussion => Topic started by: Mark Hammer on September 10, 2009, 08:08:06 AM