Solid State Guitar Amp Forum | DIY Guitar Amplifiers
Solid State Amplifiers => Amplifier Discussion => Topic started by: Dusk on July 19, 2009, 03:42:30 PM
HI All
Here are some pic of my rig
Dusk(//)
Nice outfit, I guess the Paia, going through the equalizer into the power amp, is able to sound very good.
Hi JM Fahey
Yes,very sweet
Dusk
Yea , I use a PAIA Kit for a preamp also and it sounds great, did some mods on it to get a more screaming metal sound and then run that through a 15 band eq into a 100w Mosfet power amp ....
here"s a pic ...
(http://i13.photobucket.com/albums/a300/mr_sevs/DVC00361.jpg)
I also just designed a PCB for the PAIA Kit so I can etch my own anytime I want ....
I"m building another one accept this one has a dual mono 50w output with a 4 band Parametric EQ , Might just go stereo all the way and use 2 EQ"s and 2 PAIA Kits and a foot switch to switch between the channels and go switch between Stereo and dual mono .....
Cheers