Hi all!
First of all, here's a link to the TDA7360 PDF: http://www.datasheetcatalog.org/datasheet/stmicroelectronics/1499.pdf
I've tried to make my own PCB layout now. I made a breadboard version which is completed with pretty much the same schematic, and now I would like to take this project to the next step.
List of parts in my layout:
C1 = Input capacitor, value 220nF
C2 = see C1
C3 = Output capacitor, value 2200uF 16V, Low ESR
C4 = see C3
C5 = Power filtering capacitor, value 3300uF 25V, Low ESR
C6 = Stand-by capacitor, value 47uF 25V
C7 = Power filtering capacitor, value 680nF
C8 = see C7
C9 = SVR capacitor, value 220uF 25V, Low ESR
J1 = metal jumper which connects C9 and pin 7 of TDA7360
Any comments on the chip itself, the capacitor values etc. ideas are welcome.
First of all, here's a link to the TDA7360 PDF: http://www.datasheetcatalog.org/datasheet/stmicroelectronics/1499.pdf
I've tried to make my own PCB layout now. I made a breadboard version which is completed with pretty much the same schematic, and now I would like to take this project to the next step.
List of parts in my layout:
C1 = Input capacitor, value 220nF
C2 = see C1
C3 = Output capacitor, value 2200uF 16V, Low ESR
C4 = see C3
C5 = Power filtering capacitor, value 3300uF 25V, Low ESR
C6 = Stand-by capacitor, value 47uF 25V
C7 = Power filtering capacitor, value 680nF
C8 = see C7
C9 = SVR capacitor, value 220uF 25V, Low ESR
J1 = metal jumper which connects C9 and pin 7 of TDA7360
Any comments on the chip itself, the capacitor values etc. ideas are welcome.