Quote from: s3gle on May 05, 2018, 05:02:52 AMI believe all speakers are running at 8 ohms. my guess is that the splice will create 16 ohms per output, which should be ok?
It depends on how you will wire the splice, parallel or series. Typically wiring two 8 ohm loads in series becomes 16 ohms and wiring two 8 ohm loads in parallel will become 4 ohms. On the stage amp how are the speakers wired, parallel or series? Also, what is the impedance of each speaker separately on both amps? Do you have ohms meter to check DC resistance of the connections that you intend on creating? I wouldn't power anything up until you really suss this one out.