Welcome to Solid State Guitar Amp Forum | DIY Guitar Amplifiers. Please login or sign up.

November 27, 2022, 12:47:16 AM

Login with username, password and session length

Recent Posts

 

Pignose amp?

Started by czgunner, November 02, 2020, 06:34:35 PM

Previous topic - Next topic

czgunner

Anybody have anything for this? It's the little one, 7-100 I think?
Anyway my input jack drops out when I wiggle the cable. I tried calling Pignose and they have not called me back. The jack doesn't look normal to me.
I emailed a few places and they don't recognize it to replace it.






joecool85

Without a schematic I'm not entirely sure what they have going on there.  But one thing I can tell you, a little bit of contact cleaner (I use Deoxit) will most likely fix your issue.  Put the contact cleaner onto a 1/4" plug, work it in and out a few times and try again.
Life is what you make it.
Still rockin' the Dean Markley K-20X
thatraymond.com

solderer25

If the socket is broken inside you will most likely have to replace it. I believe Fender used a similar part on many of their amps. The Champion 110 model I have uses one. If you contact Fender there is probably a part number for it. Failing that you could probably replace it with a standard stereo jack socket.