Solid State Guitar Amp Forum | DIY Guitar Amplifiers
Solid State Amplifiers => Schematics and Layouts => Topic started by: rayz1 on August 14, 2020, 10:08:37 AM
These components ended up in my hands. Looking to install into a gutted Fender XFL 1000 cab and repower. There is a slight hum that I would like to resolve. May be power supply caps in the preamp, but need information to troubleshoot. Any help finding information on these would be appreciated.
Here they are:
Thank you very much. I will let everyone know how this works out
I just got myself back into this project. Closer look at the schematics reveal that the GD2 version is not identified in the title block for the guitar driver. Before I get to far I am asking for any information on this. Is there another schematic or is this a omission?
Thanks
You had asked for GD1.
Is it GD1 or GD2 that you have?
Sorry, my mistake. I have the GD2 guitar preamp.
Ok. This is all I have for GD2.
Thank you, I will move forward on the project.