Welcome, Guest. Please login or register.

April 14, 2021, 12:58:57 PM

Login with username, password and session length

Recent Posts

 

Author Topic: Hello! And I've got a pedal question  (Read 2625 times)

Koby

  • Chipper
  • *
  • Posts: 2
  • Chip Points: 0
    • View Profile
Hello! And I've got a pedal question
« on: June 13, 2011, 12:42:55 PM »
Hey everyone.  Very cool to be here.  Hope to get you know you guys soon. 

My question is this:
I have a small pedal board.  The last thing in the chain is a Digitech Digidelay.  It works and sounds fine for what I use it for, but whenever I have my overdrive or compressor on there is a steady beeping sound that comes through to my amplifier.  I assume that it's the delay, because it's the only thing between the two signal boostin pedals and the amp.  And I've tried it with multiple amps and the same thing happens.  Can anyone explain this to me?  Thanks.  Here's my signal path.

Brace Audio Wireless
DOD A/B box
Morpheus Droptune
Boss TU2
MXR Dynacomp
Dunlop Crybaby (standard)
Digitech Bad Monkey overdrive
Digitech Digidelay


joecool85

  • SSGuitar Admin
  • Legendary
  • ******
  • Posts: 3377
  • Chip Points: 993
  • SSG Creator
    • View Profile
    • thatraymond.com
Re: Hello! And I've got a pedal question
« Reply #1 on: June 13, 2011, 12:47:17 PM »
I think you want the delay at the very beginning of your pedal board, not on the end.  Try it and see if that clears up your issue, it should.

Also, welcome aboard!
Life is what you make it.
Still rockin' the Dean Markley K-20X
thatraymond.com

Koby

  • Chipper
  • *
  • Posts: 2
  • Chip Points: 0
    • View Profile
Re: Hello! And I've got a pedal question
« Reply #2 on: June 13, 2011, 12:50:10 PM »
Thanks for the reply.  But after trial and error, I know that for the sound I'm looking for, I want it after the other effects.

Gabriel

  • Regular
  • **
  • Posts: 20
  • Chip Points: 2
    • View Profile
Re: Hello! And I've got a pedal question
« Reply #3 on: June 15, 2011, 11:40:29 AM »
Your amp have a send/return?

You could plug the DD in there and see if the problem is solved. Maybe the AD/DA converter of the DD boost its noise to the amp.