30% off all Honey Amp kits, check it out at https://store.ssguitar.com !
Started by Domin9797, July 16, 2023, 04:42:36 AM
Quote from: Domin9797 on August 02, 2023, 01:59:54 PMYeah but often shipping costs more than PCB. TPA3116 is good choice too but im not sure if i want PA which cant sound "good" while clipping. I have only 20W speaker so im little bit limited.I know about his circuits. His MDR will be my distortion channel or at least distortion pedal. Im not sure about 59 Bassman since there arent any sound clips of it. Another idea is his Orange emulator
Quote from: Tassieviking on August 04, 2023, 10:34:15 PMAccording to the SUNN BETA service manual:The Sunn Beta has 1.75v P-P out at the master line output, but each individual channel has only 1.1v P-P at the preamp line output.Sunn Beta basically has 3 effect loops.If you made a single channel the output to the power amp is only 1.1v P-P which should be ok, and you don't have to crank the volume pot all the way around.If anything you might not get enough signal to drive the TPA chip to full power since the Beta figures are peak to peak.