An update and a link

[papajeaux]

ok, i put my amp (crate gx600h) back together and set up my lightbulb current limiter.  I used a 75W bulb.  When I threw the switch, the light came on AND...nothing.  no lights no heat, just nothing.  the light glowed like i'd expect a 75W bulb to do.  no dimming or change.  so, i now take a look at the pwr transformer.  i guess it is just bad.  now I have to figure out what it is so i can get a new one.

btw, in my studies of the workings and chinese that is "transformer lingo" i came across this page.  this guy doesn't assume you know anything beyond ohm's law.  it's a pretty good read:  short and direct.
http://www.etasys.com/Main/ABCs/CalcVAWATTS.asp

pj