Solid State Guitar Amp Forum | DIY Guitar Amplifiers

Solid State Amplifiers => Amplifier Discussion => Topic started by: phatt on December 23, 2015, 01:21:17 AM

Title: Laney Amp power boosted
Post by: phatt on December 23, 2015, 01:21:17 AM
I finally finished this project,, original posting here; http://www.ssguitar.com/index.php?topic=3779.0
So some pictures of the finished unit, looks like spaghetti but no one looks inside anyway. :P

First picture has Original back panel for comparison.

(http://s5.postimg.org/f49qd46mv/a_Laney_Mod_12_15_001e.jpg) (http://postimage.org/)
adult image sharing (http://postimage.org/)

(http://s5.postimg.org/lw05fyvmf/a_Laney_Mod_12_15_003e.jpg) (http://postimage.org/)
imgurl (http://postimage.org/)

(http://s5.postimg.org/tq0r1d3fb/a_Laney_Mod_12_15_004e.jpg) (http://postimage.org/)
uploadimage (http://postimage.org/)

More clean headroom at big volume so now my keyboard sound is much improved.
Guitar also has a bit more punch.

Ideally the fins on the heatsink should be vertical but it's a big chunk of alloy and it was free junk.
Except for a few odd bits the whole power amp and supply was from my pile of parts.
Merry Xmas to all  ;D
Phil.
Title: Re: Laney Amp power boosted
Post by: blackcorvo on December 23, 2015, 07:26:04 AM
Now that's what I call an upgrade! Well done buddy!
Title: Re: Laney Amp power boosted
Post by: phatt on December 25, 2015, 01:23:13 AM
Thanks BC,, yep not for the faint of heart and likely much simpler to purchase another amp but all the multi purpose rigs I've played in shops are trashy junk.
Phil.