The SSGuitar.com web store is now online! Check it out at https://store.ssguitar.com !
Started by galaxiex, October 10, 2016, 12:37:47 AM
Quote from: BBailey on February 12, 2022, 10:17:11 AMYes, that is correct. It's just that the reverb sounds brassy and shrill rather than a good reverb. When I put the repaired PCB from the "inop" amp into the working 40XL chassis, the reverb in that amp works fine, so I am convinced the reverb drivers on both PCBs are working well. The only difference is in the quality of sound coming from the two reverb tanks.
Quote from: BBailey on February 13, 2022, 04:21:44 PMI have attached the schematic I am using - I downloaded it from this string of posts. All the resistors are new, but there could be one that is failing under load.There are some differences in this schematic and my two 40XL amps, but none that I see within the tremolo circuit.
Quote from: BBailey on February 13, 2022, 04:43:40 PMOkay - I did replace C12 once already. I'll try another.
Quote from: Jazz P Bass on February 13, 2022, 04:36:14 PMNice job on that schematic, Galaxiex.Serious work went into that.Thanks for all of that!!
Quote from: BBailey on February 13, 2022, 04:48:31 PMI should add that these schematics are very helpful! Thank you for creating them.