Plug your guitar into the 'power amp in' jack, is the hum still there?
30% off all Honey Amp kits, check it out at https://store.ssguitar.com !
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Show posts MenuQuote from: Tassieviking on February 22, 2024, 12:01:47 PMIt is usually a M205 fuse that costs cents, sometimes a ceramic type but still cheap.My meter uses a regular fuse for the 2A range but has a special fuse for the 10A range (that has it's own probe port).
Quote from: mccutter on January 13, 2024, 09:11:44 AMIt's called CR13 (one of these in the heat sink)CR10 to 13 are critical to the bias circuit as they compensate for the heatsink temperature. The Fender part # for them comes up as BYV26E. You should replace all 4 just to be safe.
Seems to be good but the vf value is different from the others (616mv vs 840mv)