Welcome to Solid State Guitar Amp Forum | DIY Guitar Amplifiers. Please login or sign up.

May 19, 2022, 08:23:30 AM

Login with username, password and session length

 

Laney VC30 Output Transformer

Started by ilyaa, December 12, 2019, 01:06:25 AM

Previous topic - Next topic

ilyaa

if you were replacing a blown OT in this 30 Watt, 4xEl84 amp, which one would you get?

https://www.mojotone.com/amp-parts/Output-Transformers/Black-Brown-Vibrolux-Tremolux-Output-Transformer-4-8-OHM

or

http://www.triodeelectronics.com/22bastou.html

(not sure if they have that one - i e-mailed em)

or

https://www.mojotone.com/amp-parts/Output-Transformers/GA30RV-RVH-Output-Transformer

or

any other suggestions?

part of my issue is the stock transformer thats in the amp is very small - its snuggled between the second preamp 12ax7 and the PI - would like to find something small so i dont have to destroy the chassis putting the new one in.....

thank you!

phatt

The links are mostly for 6V6, you need a Tx for EL84.
IIRC a quad of EL84 needs a primary winding plate to plate of 4k.  Pri Z is usually just written as (4k pp) on data sheets.
Others here might know places in your location to find a Tx that will work well for that amp.
Phil.



phatt

1760J looks like it would be close.

Generally a pair of 6V6 use ~6k pp
while a pair of EL84 would be ~8k pp

The reality is,
there are many OT parameters that effect the final outcome.
Phil