The SSGuitar.com web store is now online! Check it out at https://store.ssguitar.com !
Started by phatt, May 24, 2009, 10:18:18 AM
Quote from: sergscar on May 27, 2009, 09:31:08 AMHi Phil,Big help, of course !I already had "throwed" all the components inside "Eagle", but some doubts always arise, and the picture clarified most of them.I've installed Eagle a few days ago, just for doing the "Passive tone circuit" and takes some time to learn the "how to" (in particular, I'm feeling some difficulties for finding the right components in the libraries). Maybe there are easier softwares out there.Just one more question: COM1, COM2 and COM3 are the Ground connectors for "IN", "LED/-Vcc" and "OUT", respectively ?Thks again !
Quote from: iTzALLgoOD on May 28, 2009, 09:33:18 AMHave you downloaded the GM libraries for Eagle? It is set-up almost perfect for most of the stuff we do here. I'll see if I can find a link.here ya go. Click on the link and follow the destructions.[url="http://gaussmarkov.net/wordpress/tools/software/eagle-cad/"]http://gaussmarkov.net/wordpress/tools/software/eagle-cad/[/url]
Quote from: phatt on June 08, 2009, 10:12:16 AMJust adding Something to help you understand why this works so well.Here is a snapshot of shootout between the *Tonemender and the PhAbbTone*.Tonemender is average, at around 13dB cut in the mid.The PhAbbTone big mid notch is clearly evident and my 30dB cut claim is really quite conservitive.That deep mid notch does amazing things when used in front of even the most basic tube screamer OD pedal.BTW all those frequency altering switches and add-ons only really shift the mid point up or down a bit and in reality are not much use (IMO)I have built The famous Dumble tone stack and it's another one that shifts the mid around but nowhere near as powerfull as the HiWatt setup.Cheers, Phil.