Hi wim, first up, Does the Amp work as per normal?
For that era the Foot switch is likely a latching type.
Use what you have or use an open plug and bridge the terminals you will soon work out if it's latching or not.
I have no idea about the flying resistor, hard to tell what it's connected to??
As for the Caps padding, Yes often done when they run out of parts.
As I've never seen these amps, looks like it's a budget brand so could be factory layout.
(I've seen worse from Early Roland amps)
Re Speaker issue,, why not use the original spades?
80Watts clean from 130 Watt rig is par for most gear,, Sand or Glass
Phil.
For that era the Foot switch is likely a latching type.
Use what you have or use an open plug and bridge the terminals you will soon work out if it's latching or not.
I have no idea about the flying resistor, hard to tell what it's connected to??
As for the Caps padding, Yes often done when they run out of parts.
As I've never seen these amps, looks like it's a budget brand so could be factory layout.
(I've seen worse from Early Roland amps)
Re Speaker issue,, why not use the original spades?
80Watts clean from 130 Watt rig is par for most gear,, Sand or Glass
Phil.